Are you sure about this? I have empirically checked, on my TurboKing, that the system clock signal on pin37 of 6502 is 5Mhz.

BTW, this computer is great! I had no idea of its existence. Thank you very much for sharing all this information. I will follow your progress closely...

Regards,
Berger

I know this thread is nearly 3 years orl... but I have seen this machine in CB-Emu for the first time and don't know anything about it.

Because it is a little difficult to read... I looked at the emulation in CB-Emu and saw it has 10 Playing Levels (Level 0 ...Level 9)

So it seems the levels are:

Level 0 = 40 Moven in 3 Minutes
Level 1 = 40 Moven in 5 Minutes
Level 2 = 40 Moven in 10 Minutes
Level 3 = 40 Moven in 15 Minutes
Level 4 = 40 Moven in 30 Minutes
Level 5 = 40 Moven in 45 Minutes
Level 6 = 40 Moven in 60 Minutes
Level 7 = 40 Moven in 90 Minutes
Level 8 = 40 Moven in 120 Minutes
Level 9 = 40 Moven in 150 Minutes

No Analysis Level

Please correct me if I am wrong.

Is there a source to get a manual (or a translation of the manual english or german) to see the other functions of this great machine?

__________________
Mein Profil beim ICCF (International Correspondence Chess Federation)
https://www.iccf.com/player?id=89948&tab=3

Hi IvenGO,
could you please explain how this Set-Up position is working?
I've made many trials but had no success.

Edit: Ich habe gerade gesehen, daß IvenGO vor 3 Jahren das letzte Mal hier im Forum war, d.h. auf eine Antwort brauche ich wohl nicht warten.
Vielleicht weiß ja jemand anders hier, wie man beim Debut-M eine Stellung eingeben kann?

Regards,
Franz

Hi Franz,

Hitting "Enter Pos." clears the board and the Debut-M is ready to input the white king position (push the relevant square).
Use "Select Piece" to switch to another one, or "Force Move" to switch color (6=white, 4=black).
Once the position is legal, pressing "Enter Pos." again exits the setup mode.
As usual, the last selected color before exiting the mode is the side ready to play.

Pos. Mode is the verify mode; display C 1 means it is enabled; another hit displays C 0 which means verify mode off (ready to play).

MfG,
Eric

Hi Eric,

many thanks for this info.

Just one hour ago I've also finally found out, how the setup mode works.
The only problem I'm currently working on, is that the Debut-M immediately starts thinking and makes a black move, when the side to move (i.e. the last selected color) is black, and that won't allow the player (or opponent) to make this first (black) move.
But I've also already a solution for this problem, although it's a bit complicated by clicking 1P/2P before and after leaving the setup mode.

Edit: Plugin ist fertig - Download im üblichen Thread.

Regards,
Franz