Zitat von
GONeill
I have been contacted by somebody thinking of buying a Revelation II board and I have been asked if my DGT driver works with it, especially if it shows the LEDs correctly. I don't have one of these boards but I programmed it according to the specification so it should be OK, but it would be great if somebody could let me know if it does work. Also, do the moves and/or times show on the board's display?
Many thanks!
https://goneill.co.nz/chess.php
Hi Graham,
your drivers work fine with the Revelation II (Fritz, Shredder and LucasChess are running on my Windows-PC). The LEDs are shown correctly.
The display shows the computer moves and the time alternating. While the computer is thinking, the time is on the display. When the computer moves, the move is on the display until you move the pieces on the board. Then the time is shown again.
But the time is not always 100% correctly synched. Sometimes the clock is a little bit delayed. For example if the time in the Software for white is 9:35, the display on the RevII shows 9:38. If white is on the move again, the clock synchs correct and jumps to 9:35 and is then running parallel to the PC til the next move. Sometimes perhaps a little bit confusing. For me not really a problem.